Free Access to the whole issue

Science and Technology for Energy Transition articles are available online as soon as the production process is complete.
The currently opened issue will be updated regularly until it is complete. To keep abreast of new articles, you may either visit this page regularly or subscribe to our E-mail alert

Science and Technology for Energy Transition

Volume 77 (2022) (in progress)

Export the citation of the selected articles Export
Select all

Dossier LES4ECE’21: LES for Energy Conversion in Electric and Combustion Engines, 2021

Open Access

CFD simulations of electric motor end ring cooling for improved thermal management 17

Ronald O. Grover Jr., Xiaofeng Yang, Scott Parrish, Lorenzo Nocivelli, Katherine J. Asztalos, Sibendu Som, Yanheng Li, Cooper Burns, John Van Gilder, Nitesh Attal and Oshin Avanessian

Published online: 05 September 2022

DOI: https://doi.org/10.2516/stet/2022015

Open Access

Coupling a Lagrangian–Eulerian Spark-Ignition (LESI) model with LES combustion models for engine simulations 10

Samuel J. Kazmouz, Riccardo Scarcelli, Zhen Cheng, Meizhong Dai, Eric Pomraning, Peter K. Senecal and Magnus Sjöberg

Published online: 31 May 2022

DOI: https://doi.org/10.2516/stet/2022009

Open Access

Evaluation of the unsteady flamelet progress variable approach in Large Eddy Simulations of the ECN Spray A 5

Sandro Gierth, Philip Haspel, Arne Scholtissek, Zhen Sun, Sebastian Popp and Christian Hasse

Published online: 22 April 2022

DOI: https://doi.org/10.2516/stet/2022004

Selected Papers from 7th International Symposium on Hydrogen Energy, Renewable Energy and Materials (HEREM), 2021

Open Access

Inverse estimation of wall temperature measurement under dispersion medium shielding based on CMA-ES algorithm 16

Lin-Feng Qian, Yu-Kun Ji, Ze-Yu Zhu, Di Wu, Guang-Ming Xu and Yong Huang

Published online: 13 July 2022

DOI: https://doi.org/10.2516/stet/2022013

Open Access

Spatial evolution of the energy industry in Hebei province and drivers of green productivity factors 9

Wendai Lv, Jing Feng and Qian Wu

Published online: 24 May 2022

DOI: https://doi.org/10.2516/stet/2022007

Open Access

Oiling low temperature separation process for dehydration and de-hydrocarbon of natural gas and practical application 8

Lin Zhu, Dongjun Wang, Gaihuan Liu and Huimin Liu

Published online: 17 May 2022

DOI: https://doi.org/10.2516/stet/2022005

Open Access

Preparation and property analysis of solid carbonate-oxide composite materials for an electrolyte used in low-temperature solid oxide fuel cell 4

Yong-Xin Liang, Ze-Rong Ma, Si-Ting Yu, Xin-Yue He, Xu-Yang Ke, Ri-Feng Yan, Xiao-Xian Liang, Xin Wu, Rui-Sen Huang, Liang-Cheng Wen and Gengyu Cao

Published online: 08 April 2022

DOI: https://doi.org/10.2516/stet/2022003

Open Access

Industrial characteristics of renewable energy and spatial aggregation correlations in Beijing–Tianjin–Hebei 3

Xiaotong Wu, Yang Zhou, Changchun Cheng and Shiliang Yang

Published online: 25 March 2022

DOI: https://doi.org/10.2516/stet/2022002

Open Access

Processing on Curcuma longa waste oil-diesel blends for using as better alternative to diesel fuel 18

SanjeeviPrakash Karunanidhi, Arul Marcel Moshi Antony Joseph Decruz and Ramesh Kasimani

Published online: 09 September 2022

DOI: https://doi.org/10.2516/stet/2022016

Open Access

The industrial-grade hemp (Cannabis sativa L.) seed oil biodiesel application in a diesel engine: combustion, harmful pollutants, and performance characteristics 15

Zeki Yilbaşi, Murat Kadir Yesilyurt, Hayri Yaman and Mevlut Arslan

Published online: 13 July 2022

DOI: https://doi.org/10.2516/stet/2022011

Open Access

Experimental optimization of Waste Cooking Oil ethanolysis for biodiesel production using Response Surface Methodology (RSM) 14

Fetta Danane, Rahma Bessah, Rhiad Alloune, Latifa Tebouche, Farid Madjene, Ahmed Yasser Kheirani and Reda Bouabibsa

Published online: 08 July 2022

DOI: https://doi.org/10.2516/stet/2022014

Open Access

Review

S-wave anisotropy from two dipole sonic data processing methods, confronted with fracture permeability, logs and cores 13

José Perrin, Didier Belaud, Jean-Pierre Yver and Charles Naville

Published online: 05 July 2022

DOI: https://doi.org/10.2516/stet/2022006

Open Access

Numerical investigation on flow and heat transfer characteristics of supercritical methane–ethane mixture in a straight channel 12

Yue Wang, Yue Li, Jie Chen, Qian Li and Weihua Cai

Published online: 23 June 2022

DOI: https://doi.org/10.2516/stet/2022012

Open Access

Prediction of flexible pipe annulus composition by numerical modeling: identification of key parameters 11

Xavier Lefebvre, Nina Khvoenkova, Jean-Charles de Hemptinne, Léa Lefrançois, Béatrice Radenac, Stéphanie Pignoc-Chicheportiche and Cécile Plennevaux

Published online: 01 June 2022

DOI: https://doi.org/10.2516/stet/2022008

Open Access

Impact prediction model of acetone at various ignition advance by artificial neural network and response surface methodology techniques for spark ignition engine 7

Samet Uslu, Murat Kadir Yesilyurt and Hayri Yaman

Published online: 17 May 2022

DOI: https://doi.org/10.2516/stet/2022010

Open Access

Modelling the operation of gas storage in salt caverns: numerical approaches and applications 6

Laurent Jeannin, Andrey Myagkiy and Aden Vuddamalay

Published online: 04 May 2022

DOI: https://doi.org/10.2516/stet/2022001

Open Access

Constant distillate composition of batch distillation column with variable reflux mode based on still pot concentration 2

Naseer A. Alhaboubi

Published online: 11 February 2022

DOI: https://doi.org/10.2516/stet/2021002

Open Access

Valuing CO₂ in the development of polymer materials 1

Abderrahmane Ballamine, Abdellah Kotni, Jean-Pierre Llored and Sylvain Caillol

Published online: 28 January 2022

DOI: https://doi.org/10.2516/stet/2021001

Science and Technology for Energy Transition

Volume 77 (2022) (in progress)

Dossier LES4ECE’21: LES for Energy Conversion in Electric and Combustion Engines, 2021

CFD simulations of electric motor end ring cooling for improved thermal management 17

Coupling a Lagrangian–Eulerian Spark-Ignition (LESI) model with LES combustion models for engine simulations 10

Evaluation of the unsteady flamelet progress variable approach in Large Eddy Simulations of the ECN Spray A 5

Selected Papers from 7th International Symposium on Hydrogen Energy, Renewable Energy and Materials (HEREM), 2021

Inverse estimation of wall temperature measurement under dispersion medium shielding based on CMA-ES algorithm 16

Spatial evolution of the energy industry in Hebei province and drivers of green productivity factors 9

Oiling low temperature separation process for dehydration and de-hydrocarbon of natural gas and practical application 8

Preparation and property analysis of solid carbonate-oxide composite materials for an electrolyte used in low-temperature solid oxide fuel cell 4

Industrial characteristics of renewable energy and spatial aggregation correlations in Beijing–Tianjin–Hebei 3

Processing on Curcuma longa waste oil-diesel blends for using as better alternative to diesel fuel 18

The industrial-grade hemp (Cannabis sativa L.) seed oil biodiesel application in a diesel engine: combustion, harmful pollutants, and performance characteristics 15

Experimental optimization of Waste Cooking Oil ethanolysis for biodiesel production using Response Surface Methodology (RSM) 14

S-wave anisotropy from two dipole sonic data processing methods, confronted with fracture permeability, logs and cores 13

Numerical investigation on flow and heat transfer characteristics of supercritical methane–ethane mixture in a straight channel 12

Prediction of flexible pipe annulus composition by numerical modeling: identification of key parameters 11

Impact prediction model of acetone at various ignition advance by artificial neural network and response surface methodology techniques for spark ignition engine 7

Modelling the operation of gas storage in salt caverns: numerical approaches and applications 6

Constant distillate composition of batch distillation column with variable reflux mode based on still pot concentration 2

Valuing CO2 in the development of polymer materials 1

Valuing CO₂ in the development of polymer materials 1