Multi-material topology optimization of a flux switching machine | Science and Technology for Energy Transition (STET)

Open Access

Issue		Sci. Tech. Energ. Transition Volume 78, 2023 Power Components For Electric Vehicles


Article Number		41
Number of page(s)		10
DOI		https://doi.org/10.2516/stet/2023037
Published online		22 December 2023

Bendsøe M.P. (1989) Optimal shape design as a material distribution problem, Struct. Optim. 1, 4, 193–202. https://doi.org/10.1007/BF01650949. [CrossRef] [Google Scholar]
Dyck D.N., Lowther D.A. (1996) Automated design of magnetic devices by optimizing material distribution, IEEE Trans. Magn. 32, 3, 1188–1192. https://doi.org/10.1109/20.497456. [CrossRef] [Google Scholar]
Zhu J., Zhou H., Wang C., Zhout L., Yuan S., Zhang W. (2021) A review of topology optimization for additive manufacturing: status and challenges, Chinese J. Aeronaut. 34, 1, 91–110. https://doi.org/10.1016/j.cja.2020.09.020. [CrossRef] [MathSciNet] [Google Scholar]
Kim Y.S., Park I.H. (2010) Topology optimization of rotor in synchronous reluctance motor using level set method and shape design sensitivity, IEEE Trans. Appl. Supercond. 20, 3, 129–133. https://doi.org/10.1109/icems.2013.6754538. [Google Scholar]
Choi J.S., Izui K., Nishiwaki S., Kawamoto A., Nomura T. (2011) Topology optimization of the stator for minimizing cogging torque of IPM motors, IEEE Trans. Magn. 47, 10, 3024–3027. https://doi.org/10.1109/TMAG.2011.2158572. [CrossRef] [Google Scholar]
Lucchini F., Torchio R., Cirimele V., Alotto P., Bettini P. (2022) Topology optimization for electromagnetics: a survey, IEEE Access 10, 98593–98611. https://doi.org/10.1109/access.2022.3206368. [CrossRef] [Google Scholar]
Rozvany G.I.N., Zhou M., Birker T. (1992) Generalized shape optimization without homogenization, Struct. Optim. 4, 3–4, 250–252. https://doi.org/10.1109/AIEEPAS.1955.4499226. [CrossRef] [Google Scholar]
Bendsøe M.P., Sigmund O. (1999) Material interpolation schemes in topology optimization, Arch. Appl. Mech. 69, 9–10, 635–654. https://doi.org/10.1007/s004190050248. [CrossRef] [Google Scholar]
Sanogo S., Messine F. (2018) Topology optimization in electromagnetism using SIMP method: issues of material interpolation schemes, COMPEL – Int. J. Comput. Math. Electr. Electron. Eng. 37, 6, 2138–2157. https://doi.org/10.1108/COMPEL-04-2017-0170. [CrossRef] [Google Scholar]
Sigmund O. (2007) Morphology-based black and white filters for topology optimization, Struct. Multidiscipl. Optim. 33 4–5, 401–424. https://doi.org/10.1007/s00158-006-0087-x. [CrossRef] [Google Scholar]
Wang S., Kang J. (2002) Topology optimization of nonlinear magnetostatics, IEEE Trans. Magn. 38, 2, 1029–1032. https://doi.org/10.1109/20.996264. [CrossRef] [Google Scholar]
Choi J.S., Yoo J. (2008) Structural optimization of ferromagnetic materials based on the magnetic reluctivity for magnetic field problems, Comput. Methods Appl. Mech. Eng. 197, 49–50, 4193–4206. https://doi.org/10.1016/j.cma.2008.04.019. [CrossRef] [Google Scholar]
Guo F., Brown I.P. (2020) Simultaneous magnetic and structural topology optimization of synchronous reluctance machine rotors, IEEE Trans. Magn. 56, 10, 1–12. https://doi.org/10.1109/tmag.2020.3014289. [Google Scholar]
Lee C., Jang I.G. (2022) Multi-material topology optimization for the PMSMs under the consideration of the MTPA control, Struct. Multidiscipl. Optim. 65, 9, 263. https://doi.org/10.1007/s00158-022-03367-x. [CrossRef] [Google Scholar]
Cherrière T., Hlioui S., Gabsi M., Laurent L., Louf F., Ahmed H.B. (2022) Topology optimization of flux switching machine rotors, in: Proceedings of the 4th IEEE International Conference on Electrical Sciences and Technologies in Maghreb, CISTEM 2022, 26–28 October, Tunis, Tunisia. https://doi.org/10.1109/CISTEM55808.2022.10044071. [Google Scholar]
Rauch S.E., Johnson L.J. (1955) Design principles of fluxswitch alternators [includes discussion], Trans. Am. Inst. Electr. Eng. Part 3 74, 3, 1261–1268. https://doi.org/10.1109/AIEEPAS.1955.4499226. [Google Scholar]
Thomas A.S., Zhu Z.Q., Li G.J. (2014) Thermal modelling of switched flux permanent magnet machines, in: 2014 International Conference on Electrical Machines (ICEM), 2–5 September, Berlin, Germany, pp. 2212–2217. https://doi.org/10.1109/ICELMACH.2014.6960491. [Google Scholar]
Shi J.T., Zhu Z.Q., Wu D., Liu X. (2016) Comparative study of synchronous machines having permanent magnets in stator, Electr. Power Syst. Res. 133, 304–312. https://doi.org/10.1016/j.epsr.2015.12.018. [CrossRef] [Google Scholar]
Hoang E., Ahmed H.B., Lucidarme J. (1997) Switching flux permanent magnet polyphased synchronous machines, in: EPE 97, September, Trondheim, pp. 3903–3908. [Google Scholar]
Coleman J.E. (1973) Conventions for magnetic quantities in SI, Am. J. Phys. 41, 2, 221–223. https://doi.org/10.1119/1.1987179. [CrossRef] [Google Scholar]
Lee J., Seo J.H., Kikuchi N. (2010) Topology optimization of switched reluctance motors for the desired torque profile, Struct. Multidiscipl. Optim. 42, 5, 783–796. https://doi.org/10.1007/s00158-010-0547-1. [CrossRef] [Google Scholar]
Seebacher P., Kaltenbacher M., Wein F., Lehmann H. (2020) A pseudo density topology optimization approach in nonlinear electromagnetism applied to a 3D actuator, Int. J. Appl. Electromagn. Mech. 65, 3, 545–559. https://doi.org/10.3233/jae-201501. [Google Scholar]
Labbé T., Dehez B. (2011) Topology optimization method based on the Maxwell stress tensor for the design of ferromagnetic parts in electromagnetic actuators, IEEE Trans. Magn. 47, 9, 2188–2193. https://doi.org/10.1109/TMAG.2011.2138151. [CrossRef] [Google Scholar]
Jung T., Lee J., Lee J. (2021) Design and fabrication of magnetic system using multi-material topology optimization, IEEE Access 9, 8649–8658. https://doi.org/10.1109/ACCESS.2021.3049271. [CrossRef] [Google Scholar]
Gauthey T., Gangl P., Hassan M.H. (2022) Multi-material topology optimization with continuous magnetization direction for motors design, in 25th International Conference on Electrical Machines (ICEM), 5–8 September, Valencia, Spain, IEEE. [Google Scholar]
Cherrière T., Vancorsellis T., Hlioui S., Laurent L., Louf F., Ahmed H.B., Gabsi M. (2023) A multimaterial topology optimization considering the pm nonlinearity, IEEE Trans. Magn. 59, 5, 1–9. https://doi.org/10.1109/TMAG.2023.3256003. [CrossRef] [Google Scholar]
Aperam. Iron Cobalt Alloys – IMPHY AFK The electrical revolution. Available at https://www.aperam.com/sites/default/files/documents/imphytek.pdf, last consulted on 13/09/2023. [Google Scholar]
Wachspress E.L. (1975) A finite element rational basis, volume 114 of Mathematics in Science and Engineering, Academic Press Inc. [Google Scholar]
Cherrière T., Laurent L., Hlioui S., Louf F., Duysinx P., Geuzaine C., Ahmed H.B., Gabsi M., Fernández E. (2022) Multimaterial topology optimization using Wachspress interpolations for designing a 3-phase electrical machine stator, Struct. Multidiscipl. Optim. 65, 12, 352. https://doi.org/10.1007/s00158-022-03460-1. [CrossRef] [Google Scholar]
Shi X., Le Menach Y., Ducreux J.-P., Piriou F. (2006) Comparison of slip surface and moving band techniques for modelling movement in 3D with FEM, COMPEL – Int. J. Comput. Math. Electr. Electron. Eng. 25, 1, 17–30. https://doi.org/10.1108/03321640610634290. [CrossRef] [Google Scholar]
Arkkio A. (1987) Analysis of induction motors based on the numerical solution of the magnetic field and circuit equations, PhD Thesis, Helsinki University of Technology. [Google Scholar]
Nocedal J., Wright S.J. (2006) Numerical optimization, Springer. [Google Scholar]
Floater M., Gillette A., Sukumar N. (2014) Gradient bounds for Wachspress coordinates on polytopes, SIAM J. Numer. Anal. 52, 1, 515–532. https://doi.org/10.1137/130925712. [CrossRef] [MathSciNet] [Google Scholar]
Cherrière T., Laurent L. (2022) Wachspress2d3d, v1.0.0, Zenodo. https://doi.org/10.5281/zenodo.6630215. [Google Scholar]
Stolpe M., Svanberg K. (2001) An alternative interpolation scheme for minimum compliance topology optimization, Struct. Multidiscipl. Optim. 22, 2, 116–124. https://doi.org/10.1007/s001580100129. [CrossRef] [Google Scholar]
Jusoh L.I., Sulaiman E., Othman S.M.N.S. (2015) Comparative study of single phase FE, PM and HE flux switching motors, in: 2015 IEEE Student Conference on Research and Development (SCOReD), 13–14 December, Kuala Lumpur, Malaysia. IEEE. [Google Scholar]
Shen J.-X., Fei W.-Z. (2013) Permanent magnet flux switching machines – topologies, analysis and optimization, in: 4th International Conference on Power Engineering, Energy and Electrical Drives, 13–17 May, Istanbul, Turkey, IEEE. [Google Scholar]
Min W., Chen J.T., Zhu Z.Q., Zhu Y., Zhang M., Duan G.H. (2011) Optimization and comparison of novel E-core and C-core linear switched flux PM machines, IEEE Trans. Magn. 47, 8, 2134–2141. https://doi.org/10.1109/tmag.2011.2125977. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.