Table 7
Simulation model validation against literature data.
| Parameter | Unit | Pure CO2 | Pure CO2 | Oxyfuel | PCC | Pure CO2 |
|---|---|---|---|---|---|---|
| Source | [8] | [8] | [8] | [9] | [10] | |
| Inlet pressure bar | bar | 15 | 15 | 15 | 1.01 | 4.6 |
| Final pressure | bar | 151 | 151 | 151 | 90 | 130 |
| Liquefaction pressure | bar | N/A | 62 | N/A | N/A | 25 |
| Inter-cooling temperature | °C | 38 | 38 | 38 | 10 | 35 |
| Compressor stages | No. | 4 | 2 | 4 | 8 | 3 |
| Pumping stages | No. | 0 | 1 | 0 | 0 | 1 |
| Stage pressure drop | bar | N/A | N/A | N/A | 0.5 | 0.1 |
| Equation of state | PR | PR | PR | TREND | PR | |
| Compressor efficiency | % | 80 | 80 | 80 | 85 | 75 |
| Pump and compressor power | kWh/tCO2 | 36.9 | 32 | 39.6 | 92.9 | 62 |
| Power – this study | kWh/tCO2 | 36.85 | 32.1 | 39.1 | 91.6 | 61.3 |
| Difference | % | 0.14 | −0.31 | 1.3 | 1.4 | 1.1 |
PR: Peng-Robinson. [8] uses PR in REFPROP, [10] uses PR in Aspen HYSYS. Oxyfuel: Composition is 96.78% CO2. For simulation in this study REFPROP has been used as back-end in CoolProp. PCC: Post Combustion Capture. The source uses 99.99% pure CO2 but the validation is against 100% pure CO2. The power reported from [10] is total power including refrigeration compressor power in addition to compression and pumping power. Value read from graph.
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.