Open Access
Table 2
The equations used to predict fuel properties [74–77].
Property | Formula | Definitions |
---|---|---|
Acid Value |
![]() |
AV: The acid value, v: The volume of the titer solution, b: The blank volume, w: The mass of the oil. |
Free Fatty Acid |
![]() |
FFA: Free Fatty Acid. |
Molecular Weight | MW = 3 · AMWFA + WGB | AMWFA: The Average Molecular Weight of all Fatty Acids, WGB: Weight of Glycerol Backbone. |
Saponification Number |
![]() |
SN: Saponification Number, A i : The percentage of each component in the FAME. |
Iodine Value |
![]() |
IV: Iodine Value, C DB: The number of double bonds of each FAME. |
Cetane Number |
![]() |
CN: The Cetane Number of FAME. |
Higher Heating Value | HHV = 49.43 − [0.041 · SV + 0.015 · IV] | HHV: The Higher Heating Value of FAME. |
Cloud Point | CP = 0.526 · (C16:0) − 4.992 | CP: The Cloud Point of FAME. |
Long Chain Saturated Factor | LCSF = 0.1 · (C16:0) + 0.5 · (C18:0) + (C20:0) + 1.5 · (C22:0) + 2 · (C24:0) | LCSF: The Long Chain Saturated Factor of FAME. |
Cold Filter Plugging Point | CFPP = 3.1417 · LCSF − 16.477 | CFPP: The Cold Filter Plugging Point. |
Density |
![]() |
D: The density of FAME. |
Degree of Unsaturation |
![]() |
DU: The degree of unsaturation parameter, MUFA: monounsaturated fatty acids, PUFA: polyunsaturated fatty acids. |
Oxidation Stability |
![]() |
OS: The Oxidation Stability of FAME. |
Kinematic viscosity | ln(η i ) = −12.503 + [2.496 · ln(MW i )] − (0.178 · N s ) | ln(η i ): The kinematic viscosity of FAME, N s : The number of double bonds in the monounsaturated and polyunsaturated fatty acids. |
Pour Point | PP = 0.571 · C16:0 − 12.24 | PP: The Pour Point of FAME. |
Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.
Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.
Le chargement des statistiques peut être long.