Processing on Curcuma longa waste oil-diesel blends for using as better alternative to diesel fuel | Science and Technology for Energy Transition (STET)

Open Access

Issue		Sci. Tech. Energ. Transition Volume 77, 2022


Article Number		18
Number of page(s)		15
DOI		https://doi.org/10.2516/stet/2022016
Published online		09 September 2022

Örs I., Sarıkoç S., Atabani A.E., Ünalanand S., Akansu S.O. (2018) The effects on performance, combustion and emission characteristics of DICI engine fuelled with TiO₂nanoparticles addition in diesel / biodiesel / n-butanolblends, Fuel 234, 177–188. https://doi.org/10.1016/j.fuel.2018.07.024. [CrossRef] [Google Scholar]
Krishnamoorthi M., Malayalamurthi R. (2017) Experimental investigation on performance, emission behavior and exergy analysis of a variable compression ratio engine fueled with diesel – Aegle marmelos oil – diethyl ether blends, J. Energy 128, 312–328. https://doi.org/10.1016/j.energy.2017.04.038. [CrossRef] [Google Scholar]
Krishnamoorthi M., Malayalamurthi R. (2018) Availability analysis, performance, combustion and emission behavior of bael oil – diesel – diethyl ether blends in a variable compression ratio diesel engine, J. Renew. Energy 119, 235–252. https://doi.org/10.1016/j.renene.2017.12.015. [CrossRef] [Google Scholar]
Geng L., Chen Y., Chen X., Chia-fon F.L. (2018) Study on combustion characteristics and particulate emissions of a common-rail diesel engine fueled with n-butanol and waste cooking oil blends, J. Energy Inst. 92, 3, 438–449. https://doi.org/10.1016/j.joei.2018.05.004. [Google Scholar]
Vellaiyan S., Subbiah A., Chockalingam P. (2018) Combustion, performance, and emission analysis of diesel engine fueled with water-biodiesel emulsion fuel and nano additive”, Environ. Sci. Pollut. Res. 25, 334778–33489. https://doi.org/10.1007/s11356-018-3216-3. [Google Scholar]
Online citation: https://www.ppac.gov.in/content/212_1_ImportExport.aspx. [Google Scholar]
Karthik N., Xavier X.G., Rajasekar R., Ganesh Bairavan P., Dhanseelan S. (2017) Experimental investigation of performance and emission characteristics of various nano particles with bio-diesel blend on di diesel engine, IOP Conf. Ser.: Mater. Sci. Eng. 197, 012014. https://doi.org/10.1088/1757-899X/197/1/012014. [CrossRef] [Google Scholar]
Sivakrishna T., Madhu S., Sivakumar K. (2019) The effect of palm biodiesel fuel on the performance of automotive four stroke diesel engine, IOP Conf. Ser.: Mater. Sci. Eng. 574, 012015. https://doi.org/10.1088/1757-899X/574/1/012015. [CrossRef] [Google Scholar]
Maawa W.N., Rizalman M., Yusri I.M., Febrina R. (2019) Effect of emulsified palm oil Biodiesel – diesel blends to the combustion characteristics of compression ignition engine, IOP Conf. Ser.: Mater. Sci. Eng. 469, 012080. https://doi.org/10.1088/1757-899x/4691/1/012080. [CrossRef] [Google Scholar]
Baranitharan P., Ramesh K., Sakthivel R. (2019) Measurement of performance and emission distinctiveness of Aegle marmelos seed cake pyrolysis oil/diesel/TBHQ opus powered in a DI diesel engine using ANN and RSM, Measurement 144, 366–380. https://doi.org/10.1016/j.measurement.2019.05.037. [CrossRef] [Google Scholar]
Naik B.D., Meivelu U., Thangarasu V., Annamalai S., Sivasankaralingam V. (2022) Experimental and empirical analysis of a diesel engine fuelled with ternary blends of diesel, waste cooking sunflower oil biodiesel and diethyl ether, Fuel 320, 123961. https://doi.org/10.1016/j.fuel.2022.123961. [CrossRef] [Google Scholar]
Gowthaman S., Thangavel K. (2022) Performance, emission and combustion characteristics of a diesel engine fuelled with diesel/Coconut Shell Oil blends, Fuel 322, 124293. https://doi.org/10.1016/j.fuel.2022.124293. [CrossRef] [Google Scholar]
Mohamed Shameer P., Ramesh K., Sakthivel R., Purnachandran R. (2017) Effect of fuel injection parameters on emission characteristics of diesel engines operating on various biofuels: A review, Renew. Sustain. Energy Rev. 67, 1267–1281. https://doi.org/10.1016/j.rser.2016.09.117. [CrossRef] [Google Scholar]
Mohamed Shameer P., Ramesh K. (2017) Green technology and performance consequences of an eco-friendly substance on a 4-stroke diesel engine at standard injection timing and compression ratio, J. Mech. Sci. Technol. 31, 3, 1497–1507. https://doi.org/10.1007/s12206-017-0249-3. [Google Scholar]
Reddy M.J., Rakesh N.S., Jayaraman J., Anand K.V., Appavu P., Arunkumar T. (2021) Effect of novel bio-waste derived nano particles as additives on the performance of diesel engine fuelled with waste cooking oil biodiesel blends, Mater. Today: Proc. 44, 3530–3535. https://doi.org/10.1016/j.matpr.2020.09.292. [CrossRef] [Google Scholar]
Sathiyamoorthi R., Sankaranarayanan G., Adhithkumaar S.B., Chiranjeevi T., Dilip Kumar D. (2018) Experimental investigation on performance, combustion and emission characteristics of a single cylinder diesel engine fuelled by biodiesel derived from Cymbopogon Martinii, J. Renew. Energy 132, 394–415. https://doi.org/10.1016/j.renene.2018.08.001. [Google Scholar]
Arunprasad S., Balusamy T. (2018) Experimental investigation on the performance and emission characteristics of a diesel engine by varying the injection pressure and injection timing using mixed biodiesel, Int. J. Green Energy 15, 6, 376–384. https://doi.org/10.1080/15435075.2018.1464923. [CrossRef] [Google Scholar]
Singh P., Chauhan S.R., Goel V. (2018) Assessment of diesel engine combustion, performance and emission characteristics fuelled with dual fuel blends, J. Renew. Energy 125, 501–510. https://doi.org/10.1016/j.renene.2018.02.105. [CrossRef] [Google Scholar]
Sahin Z., Durgun O., Tuti M. (2018) An experimental study on the effects of inlet water injection of diesel engine Heat Release Rate, fuel consumption, opacity, and NO_x emissions, in: Exergetic, energetic and environmental dimensions, Elsevier, Netherlands. https://doi.org/10.1016/B978-0-12-813734-5.00055-X. [Google Scholar]
Rajesh M., Arul Marcel Moshi A., Mathew J., Gowthaman K. (2016) Hybrid optimization of turning parameters using Copras-Taguchi technique, Int. J. Appl. Eng. Res. 11, 719–728. [Google Scholar]
Sundara Bharathi S.R., Ravindran D., Arul Marcel Moshi A., Rajeshkumar R., Palanikumar R. (2020) Multi objective optimization of CNC turning process parameters with acrylonitrile butadiene styrene material, Mater. Today Proc. 27, 3, 2042–2047. https://doi.org/10.1016/j.matpr.2019.09.055. [CrossRef] [Google Scholar]
Arul Marcel Moshi A., Madasamy S., Sundara Bharathi S.R., Periyanayaganathan P., Prabaharan A. (2019) Investigation on the mechanical properties of sisal – banana hybridized natural fiber composites with distinct weight fractions, AIP Conf. Proc. 2128, 020029. https://doi.org/10.1063/1.5117941. [CrossRef] [Google Scholar]
Arulselvan S., Ravindran D., Arul Marcel Moshi A., Prince D. (2019) Optimization of surface roughness, material removal rate and taper error for wirecut electrical discharge machined taper parts of inconel 825 alloy, J. Balkan Tribol. Assoc. 25, 1028–1037. [Google Scholar]
Senthilkumar S., Karthick A., Madavan R., Arul Marcel Moshi A., Sundara Bharathi S.R., Saroja S., Dhanalakshmi C.S. (2021) Optimization of transformer oil blended with natural ester oils using Taguchi-based Grey Relational Analysis, Fuel 288, 119629. https://doi.org/10.1016/j.fuel.2020.119629. [CrossRef] [Google Scholar]
Hariharasakthisudhan P., Arul Marcel Moshi A., Sundara Bharathi S.R., Logesh K. (2019) Regression and Grey Relational Analysis on friction and wear behavior of AA6061/Al₂O₃/Si₃N₄/graphite hybrid nanocomposites, Mater. Res. Expr. 6, 085017. https://doi.org/10.1088/2053-1591/ab1cd3. [CrossRef] [Google Scholar]
Sundara Bharathi S.R., Ravindran D., Arul Marcel Moshi A. (2020) Multi response optimization of CNC turning parameters on austenitic stainless steel 303 using Taguchi based Grey Relational Analysis, Trans. Can. Soc. Mech. Eng. 44, 592–601. https://doi.org/10.1139/tcsme-2019-0254. [CrossRef] [Google Scholar]
Arul Marcel Moshi A., Ravindran D., Sundara Bharathi S.R., Michael Thomas Rex F., Ramesh Kumar P. (2020) TIG welding process parameter optimization for aluminium alloy 6061 using Grey Relational Analysis and regression equations, in: Numerical optimization in engineering and sciences, Part of the advances in intelligent systems and computing book series, Vol. 979, AISC, Springer Nature, Singapore, pp. 412–425. https://doi.org/10.1007/978-981-15-3215-3_41. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.