Issue |
Sci. Tech. Energ. Transition
Volume 79, 2024
Decarbonizing Energy Systems: Smart Grid and Renewable Technologies
|
|
---|---|---|
Article Number | 78 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.2516/stet/2024080 | |
Published online | 08 October 2024 |
Regular Article
Synergistic enhancement of photoelectrocatalytic activity and photostability in CdS photoanodes by ultrathin polydopamine layer
1
School of Materials Science and Engineering, Yingkou Institute of Technology, Yingkou 115000, PR China
2
School of Materials and Metallurgy, University of Science and Technology Liaoning, Anshan 114051, PR China
3
School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063, PR China
* Corresponding authors: hanlu@ustl.edu.cn (Lu Han); lixibao@nchu.edu.cn (Xibao Li)
Received:
29
June
2024
Accepted:
3
September
2024
CdS-based photocatalyst and photoanode have recently drawn the attention of several investigators primarily in connection with its excellent visible light response in various catalytic reactions involving light, especially photoelectrochemical (PEC) water splitting. The present approach highlights the concept of constructing a biological functional layer incorporated for photochemical instable semiconductors for practical PEC applications. However, practical applications of CdS-based photoanodes are limited by rapid charge recombination and severe photo corrosion. This study introduces a novel approach to enhance reaction kinetics and stability. We present a CdS nanorod photoanode with an ultrathin layer of polydopamine (PDA), prepared through a conformal polymerization assembly process, which serves as a robust platform for subsequent assembly of hole cocatalysts FeOOH. The resulting sandwich structure of CdS/PDA/FeOOH photoanode demonstrates an incident to current efficiency (IPCE) of 7.1% at 420 nm and a photocurrent of 1.9 mA/cm2 at 1.23 V versus the reversible hydrogen potential (RHE). The integrated photoanode exhibits significantly prolonged photostability compared to CdS, CdS/PDA, and CdS/FeOOH photoanodes. The significance of this work lies in constructing a FeOOH structure (with hole extraction and consumption capabilities) on the CdS outermost layer using an easy-to-operate preparation process, thereby revealing the ability of PDA to enable the passage of photogenerated holes. The present approach highlights the concept of integrating biologically functional layers to stabilize photochemically unstable semiconductors for practical PEC applications.
Key words: Polydopamine / Hole transport / CdS photoanode / Photocorrosion / Charge separation
© The Author(s), published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.