Investigation of salt precipitation dynamic in porous media by X-ray and Neutron dual-modality imaging | Science and Technology for Energy Transition (STET)

Characterization and Modeling of the Subsurface in the Context of Ecological Transition

Open Access

Numéro		Sci. Tech. Energ. Transition Volume 78, 2023 Characterization and Modeling of the Subsurface in the Context of Ecological Transition


Numéro d'article		11
Nombre de pages		13
DOI		https://doi.org/10.2516/stet/2023009
Publié en ligne		28 avril 2023

Kleinitz W., Dietzsch G., Köhler M. (2003) Halite scale formation in gas-producing wells, Chem. Eng. Res. Des. 81, 3, 352–358. https://doi.org/10.1205/02638760360596900. [CrossRef] [Google Scholar]
Whitaker S. (1977) Simultaneous heat, mass, and momentum transfer in porous media: a theory of drying, in Advances in Heat Transfer, J.P. Hartnett, T.F. Irvine (eds.),Elsevier, pp. 119–203 [Online]. Available: https://www.sciencedirect.com/science/article/pii/S0065271708702235. [CrossRef] [Google Scholar]
Prat M., Bouleux F. (1999) Drying of capillary porous media with a stabilized front in two dimensions, Phys. Rev. E 60, 5, 5647–5656. https://doi.org/10.1103/PhysRevE.60.5647. [CrossRef] [PubMed] [Google Scholar]
Lopez O., Youssef S., Estublier A., Alvestad J., Strandli C.W. (2020) Permeability alteration by salt precipitation: Numerical and experimental investigation using X-Ray Radiography, E3S Web Conf. 146, 3001. https://doi.org/10.1051/e3sconf/202014603001. [CrossRef] [EDP Sciences] [Google Scholar]
Peysson Y., Bazin B., Magnier C., Kohler E., Youssef S. (2011) Permeability alteration due to salt precipitation driven by drying in the context of CO2 injection, Energy Proc. 4, 4387–4394. https://doi.org/10.1016/j.egypro.2011.02.391. [CrossRef] [Google Scholar]
Peysson Y., André L., Azaroual M. (2014) Well injectivity during CO₂ storage operations in deep saline aquifers – Part 1: Experimental investigation of drying effects, salt precipitation and capillary forces, Int. J. Greenh. Gas Control. 22, 291–300. https://doi.org/10.1016/j.ijggc.2013.10.031. [CrossRef] [Google Scholar]
Aquilina P. (2012) Impairment of gas well productivity by salt plugging: a review of mechanisms, modeling, monitoring methods, and remediation techniques, in: Paper presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, October 2012. SPE-158480-MS. [Google Scholar]
André L., Peysson Y., Azaroual M. (2014) Well injectivity during CO₂ storage operations in deep saline aquifers – Part 2: Numerical simulations of drying, salt deposit mechanisms and role of capillary forces, Int. J. Greenh. Gas Control. 22, 301–312. https://doi.org/10.1016/j.ijggc.2013.10.030. [CrossRef] [Google Scholar]
Giorgis T., Carpita M., Battistelli A. (2007) 2D modeling of salt precipitation during the injection of dry CO2 in a depleted gas reservoir, Energy Convers. Manag. 48, 6, 1816–1826. https://doi.org/10.1016/j.enconman.2007.01.012. [CrossRef] [Google Scholar]
Mahadevan J., Sharma M.M., Yortsos Y.C. (2006) Flow-through drying of porous media, AIChE J. 52, 7, 2367–2380. https://doi.org/10.1002/aic.10859. [CrossRef] [Google Scholar]
Figus C., Bray Y., Bories S., Prat M. (1999) Heat and mass transfer with phase change in aporous structure partially heated: continuum model and pore network simulations, Int. J. Heat Mass Transf. 42, 14, 2557–2569. https://doi.org/10.1016/S0017-9310(98)00342-1. [CrossRef] [Google Scholar]
Plourde F., Prat M. (2003) Pore network simulations of drying of capillary porous media. Influence of thermal gradients, International Journal of Heat and Mass Transfer 46(7), 1293–1307. https://doi.org/10.1016/S0017-9310(02)00391-5. [CrossRef] [Google Scholar]
Mahadevan J., Sharma M.M., Yortsos Y.C. (2007) Water removal from porous media by gas injection: Experiments and simulation, Transp. Porous Media 66, 3, 287–309. https://doi.org/10.1007/s11242-006-0030-z. [CrossRef] [Google Scholar]
Le D., Hoang H., Mahadevan J. (2009) Impact of capillary-driven liquid films on salt crystallization, Transp. Porous Media 80, 2, 229. https://doi.org/10.1007/s11242-009-9353-x. [CrossRef] [Google Scholar]
Tengattini A., Lenoir N., Andò E., Giroud B., Atkins D., Beaucour J., Viggiani G. (2020) NeXT-Grenoble, the Neutron and X-ray tomograph in Grenoble, Nucl. Instrum. Methods Phys. Res. A: Accel. Spectrom. Detect. Assoc. Equip. 968, 163939. https://doi.org/10.1016/j.nima.2020.163939. [CrossRef] [Google Scholar]
Grünauer F. (2005) Design, optimization, and implementation of the new neutron radiography facility at FRM-II, [Online]. Available: https://pdfs.semanticscholar.org/041f/fe1ef9477759f231bd46224240ef152141d7.pdf . [Google Scholar]
Tengattini A., Lenoir N., Andò E., Viggiani G. (2021) Neutron imaging for geomechanics: A review, Geomech. Energy Environ. 27, 100206. https://doi.org/10.1016/j.gete.2020.100206. [CrossRef] [Google Scholar]
Youssef S., Mascle M., Vizika O. (2018) High throughput coreflood experimentation as a tool for EOR project design, in: SPE Improved Oil Recovery Conference, Tulsa, Oklahoma, USA. [Google Scholar]
Gassara O., Estublier A., Garcia G., Noirez S., Cerepi A., Loisy C., Le Roux O., Petit A., Rossi L., Kennedy S., Brichart T., Chiquet P., Luu Van Lang L., André Duboin F., Gance J., Texier B., Lavielle B., Thomas B. (2021) The aquifer-CO₂ leak project: Numerical modeling for the design of a CO₂ injection experiment in the saturated zone of the Saint-Emilion (France) site, Int. J. Greenh. Gas Control. 104, 103196. https://doi.org/10.1016/j.ijggc.2020.103196. [CrossRef] [Google Scholar]
Rinard P. (1991) Neutron interactions with matter, Passive Nondestructive Assay of Nuclear Materials 375–377. [Google Scholar]

Les statistiques affichées correspondent au cumul d'une part des vues des résumés de l'article et d'autre part des vues et téléchargements de l'article plein-texte (PDF, Full-HTML, ePub... selon les formats disponibles) sur la platefome Vision4Press.

Les statistiques sont disponibles avec un délai de 48 à 96 heures et sont mises à jour quotidiennement en semaine.

Le chargement des statistiques peut être long.