Modeling the effect of plastic oil obtained from XLPE cable waste on diesel engine performance and emission parameters with the response surface method | Science and Technology for Energy Transition (STET)

Open Access

Issue		Sci. Tech. Energ. Transition Volume 79, 2024


Article Number		58
Number of page(s)		14
DOI		https://doi.org/10.2516/stet/2024059
Published online		26 August 2024

Wong S.L., Ngadi N., Abdullah T.A.T., Inuwa I.M. (2015) Current state and future prospects of plastic waste as source of fuel: A review, Renew. Sustain. Energy Rev. 50, 1167–1180. [CrossRef] [Google Scholar]
Fan S., Zhang Y., Cui L., Maqsood T., Nižetić S. (2023) Cleaner production of aviation oil from microwave-assisted pyrolysis of plastic wastes, J. Clean. Prod. 390, 136102. [CrossRef] [Google Scholar]
Geyer R., Jambeck J.R., Law K.L. (2017) Production, use, and fate of all plastics ever made, Sci. Adv. 3, 7, e1700782. [CrossRef] [Google Scholar]
Phanisankar B.S.S., Vasudeva Rao N., Manikanta J.E. (2020) Conversion of waste plastic to fuel products, Mater. Today Proc. 33, 5190–5195. [CrossRef] [Google Scholar]
Singh P., Déparrois N., Burra K.G., Bhattacharya S., Gupta A.K. (2019) Energy recovery from cross-linked polyethylene wastes using pyrolysis and CO2 assisted gasification, Appl. Energy 254, 113722. [CrossRef] [Google Scholar]
Shamsaei M., Aghayan I., Kazemi K.A. (2017) Experimental investigation of using cross-linked polyethylene waste as aggregate in roller compacted concrete pavement, J. Clean. Prod. 165, 290–297. [CrossRef] [Google Scholar]
Nikvar-Hassani A., Chen H., Motameni S., Visnansky C., Lovelady M., Cutruzzula S.E., Zhang L. (2024) Using cross-linked polyethylene (XLPE) waste in production of concrete: An experimental study, Constr. Building Mater. 411, 134261. [CrossRef] [Google Scholar]
Koorla P.B., Dasari N., Mohammad N.S. (2023) Fuel oil from plastic waste, Mater. Today Proc. 76, 166–169. [CrossRef] [Google Scholar]
Faisal F., Rasul M.G., Chowdhury A.A., Jahirul M.I., Hazrat M.A. (2023) Performance and emission characteristics of a CI engine with post-treated plastic pyrolysis oil and diesel blend, Energy Rep. 9, 87–92. [CrossRef] [Google Scholar]
Singh R.K., Ruj B. (2015) Plasticwaste management and disposal techniques – Indian scenario, Int. J. Plast. Tech. 19, 2, 211–226. [Google Scholar]
Jha K.K., Kannan T.T.M. (2020) Alternate fuel preparation in low cost from waste plastic: A review, Mater. Today Proc. 37, 8, 1–2. [CrossRef] [Google Scholar]
Mani M., Subash C., Nagarajan G. (2009) Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil, Appl. Therm. Eng. 29, 13, 2738–2744. [CrossRef] [Google Scholar]
Panda A.K., Murugan S., Singh R.K. (2016) Performance and emission characteristics of diesel fuel produced from waste plastic oil obtained by catalytic pyrolysis of waste polypropylene, Energy Sources Recovery Util. Environ. Eff. 38, 4, 568–576. [Google Scholar]
Mani M., Nagarajan G., Sampath S. (2010) An experimental investigation on a di diesel engine using waste plastic oil with exhaust gas recirculation, Fuel 89, 8, 1826–1832. [CrossRef] [Google Scholar]
Das A.K., Hansdah D., Mohapatra A.K., Panda A.K. (2020) Energy, exergy and emission analysis on a DI single cylinder diesel engine using pyrolytic waste plastic oil diesel blend, J. Energy Inst. 93, 4, 1624–1633. [CrossRef] [Google Scholar]
Singh T.S., Rajak U., Dasore A., Muthukumar M., Verma T.N. (2021) Performance and ecological parameters of a diesel engine fueled with diesel and plastic pyrolyzed oil (PPO) at variable working parameters, Environ. Tech. Innovat. 22, 101491. [CrossRef] [Google Scholar]
Sunaryo, Sesotyo P.A., Saputra E., Sasmito A.P. (2021) Performance and fuel consumption of diesel engine fueled by diesel fuel and waste plastic oil blends: an experimental investigation, Autom. Exp. 4, 1, 20–26. [Google Scholar]
Mangesh V.L., Padmanabhan S., Tamizhdurai P., Ramesh A. (2020) Experimental investigation to identify the type of waste plastic pyrolysis oil suitable for conversion to diesel engine fuel, J. Clean. Prod. 246, 119066. [CrossRef] [Google Scholar]
Yaman H., Yesilyurt M.K., Uslu S. (2022) Simultaneous optimization of multiple engine parameters of a 1-heptanol/gasoline fuel blends operated a port-fuel injection spark-ignition engine using response surface methodology approach, Energy 238, 122019. [CrossRef] [Google Scholar]
USLU, S., (2019) Atık Lastik Piroliz Yağı-Dizel Karışımları ile Çalışan Bir Dizel Motorda Emisyon ve Performansın Eşzamanlı Tahminine Yönelik Bir Yanıt Yüzey Metodolojisinin Geliştirilmesi, Düzce Üniv. Bilim Teknol. Derg. 7, 3, 1261–1278. [Google Scholar]
Uslu S., Celik M.B. (2018) Prediction of engine emissions and performance with artificial neural networks in a single cylinder diesel engine using diethyl ether, Eng. Sci. Tech. 21, 6, 1194–1201. [Google Scholar]
El Hajam M., Idrissi Kandri N., Özdemir S., Plavan G., Ben Hamadi N., Boufahja F., Zerouale A. (2023) Statistical design and optimization of Cr (VI) adsorption onto native and HNO3/NaOH activated cedar sawdust using AAS and a response surface methodology (RSM), Molecules 28, 21, 7271. [CrossRef] [PubMed] [Google Scholar]
Aydın M., Uslu S., Bahattin Çelik M. (2020) Performance and emission prediction of a compression ignition engine fueled with biodiesel-diesel blends: A combined application of ANN and RSM based optimization, Fuel 269, 117472. [CrossRef] [Google Scholar]
Uslu S., Celik M. (2023) Response surface methodology-based optimization of the amount of cerium dioxide (CeO₂) to increase the performance and reduce emissions of a diesel engine fueled by cerium dioxide/diesel blends, Energy 266, 126403. [CrossRef] [Google Scholar]
Dey S., Reang N.M., Das P.K., Deb M. (2021) Comparative study using RSM and ANN modelling for performance-emission prediction of CI engine fuelled with bio-diesohol blends: a fuzzy optimization approach, Fuel 292, 120356. [CrossRef] [Google Scholar]
Kumar M., Gautam R., Ansari N.A. (2024) Optimisation of an experimental and feasibility research on a CRDI diesel engine based on a blend of waste cooking oil and waste plastic oil using RSM: A value addition for disposed waste oil, J. Energy Inst., In Press, 101564. [CrossRef] [Google Scholar]
Simsek S., Uslu S. (2020) Investigation of the effects of biodiesel/2-ethylhexyl nitrate (EHN) fuel blends on diesel engine performance and emissions by response surface methodology (RSM), Fuel 275, 118005. [CrossRef] [Google Scholar]
Simsek S., Uslu S., Simsek H., Uslu G. (2021) Improving the combustion process by determining the optimum percentage of liquefied petroleum gas (LPG) via response surface methodology (RSM) in a spark ignition (SI) engine running on gasoline-LPG blends, Fuel Process. Technol. 221, 106947. [CrossRef] [Google Scholar]
Simsek S., Uslu S., Coştu R. (2020) A novel approach to study the effect of motor silk-added pyrolysis tire oil on performance and emission characteristics of a diesel engine, Fuel 288, 119668. [Google Scholar]
Kalargaris I., Tian G., Gu S. (2017) Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil, Fuel Process. Technol. 157, 108–115. [CrossRef] [Google Scholar]
Senthilkumar P., Sankaranarayanan G. (2016) Effect of Jatropha methyl ester on waste plastic oil fueled DI diesel engine, J. Energy Inst. 89, 4, 504–512. [CrossRef] [Google Scholar]
Khatha W., Ekarong S., Somkiat M., Jiraphon S. (2020) Fuel properties, performance and emission of alternative fuel from pyrolysis of waste plastics, IOP Conf. Ser. Mater. Sci. Eng. 717, 1, 012001. [CrossRef] [Google Scholar]
Karagöz M., Ağbulut Ü., Sarıdemir S. (2020) Waste to energy: Production of waste tire pyrolysis oil and comprehensive analysis of its usability in diesel engines, Fuel 275, 117844. [CrossRef] [Google Scholar]
Simsek S., Uslu S. (2020) Comparative evaluation of the influence of waste vegetable oil and waste animal oil-based biodiesel on diesel engine performance and emissions, Fuel 280, 118613. [CrossRef] [Google Scholar]
Agric I.J., Eng B., Venkanna B.K., Reddy C.V. (2011) Performance, emission and combustion characteristics of direct injection diesel engine running on calophyllum inophyllum linn oil (honne oil), Int. J. Agric. Biol. Eng. 4, 1, 26–34. [Google Scholar]
Solantausta Y., Nylund N.O., Westerholm M., Koljonen T., Oasmaa A. (1993) Wood-pyrolysis oil as fuel in a diesel-power plant, Bioresour. Technol. 46, 1–2, 177–188. [CrossRef] [Google Scholar]
Shihadeh A., Hochgreb S. (2000) Diesel engine combustion of biomass pyrolysis oils, Energy Fuels 14, 2, 260–274. [CrossRef] [Google Scholar]
Damodharan D., Sathiyagnanam A.P., Rana D., Rajesh Kumar B., Saravanan S. (2017) Extraction and characterization of waste plastic oil (WPO) with the effect of n-butanol addition on the performance and emissions of a DI diesel engine fueled with WPO/diesel blends, Energy Convers. Manag. 131, 117–126. [CrossRef] [Google Scholar]
Kumar P.S., Sankaranarayanan G. (2016) Investigation on environmental factors of waste plastics into oil and its emulsion to control the emission in DI diesel engine, Ecotoxicol. Environ. Saf. 134, 440–444. [CrossRef] [Google Scholar]
Mani M., Nagarajan G., Sampath S. (2011) Characterisation and effect of using waste plastic oil and diesel fuel blends in compression ignition engine, Energy 36, 1, 212–219. [CrossRef] [Google Scholar]
Öz İ.H., Borat O., Sürmen A. (2003) Içten Yanmali Motorlar, Birsen Yayinevi, 258 p. [Google Scholar]
Dafsari R.A., Lee H.J., Han J., Park D.C., Lee J. (2019) Viscosity effect on the pressure swirl atomization of an alternative aviation fuel, Fuel 240, 179–191. [CrossRef] [Google Scholar]
Donghui Q., Longbao Z., Shenghua L. (2005) Experimental studies on the combustion characteristics and performance of a naturally aspirated, direct injection engine fuelled with a liquid petroleum gas/diesel blend, Proc. Inst. Mech. Eng. Part D 219, 2, 253–261. [CrossRef] [Google Scholar]
Demirtaş G., Balki M.K., Sayin C. (2024) Effects of a CRDI engine running on biodiesel, n-octanol and nanoparticle blended nanofuel on performance, emissions and combustion, Arab. J. Sci. Eng. 49, 2565–2580. [Google Scholar]
Kidoguchi Y., Yang C., Kato R., Miwa K. (2000) Effects of fuel cetane number and aromatics on combustion process and emissions of a direct-injection diesel engine, JSAE Rev. 21, 4, 469–475. [CrossRef] [Google Scholar]
Qi D.H., Chen H., Geng L.M., Bian Y.Z. (2011) Effect of diethyl ether and ethanol additives on the combustion and emission characteristics of biodiesel-diesel blended fuel engine, Renew. Energy 36, 4, 1252–1258. [CrossRef] [Google Scholar]
Sundar S.P., Vijayabalan P., Sathyamurthy R., Said Z., Thakur A.K. (2023) Experimental and feasibility study on nano blended waste plastic oil based diesel engine at various injection pressure: A value addition for disposed plastic food containers, Fuel Process. Technol. 242, 107627. [CrossRef] [Google Scholar]
Padmanaba Sundar S.S., Vijayabalan P. (2021) Pyrolysis of disposed plastic food containers and its potential in diesel engine by doping with nano particle at optimum injection timing, Sustain. Energy Technol. Assessm. 47, 101537. [Google Scholar]
Rakopoulos C.D., Giakoumis E.G. (2009) Diesel engine transient operation: Principles of operation and simulation analysis, Springer, London, 390 p. [Google Scholar]
Ma Z., Huang Z., Li C., Wang X., Miao H. (2007) Effects of fuel injection timing on combustion and emission characteristics of a diesel engine fueled with diesel-propane blends, Energy Fuels 21, 3, 1504–1510. [CrossRef] [Google Scholar]
Içingür Y., Altiparmak D. (2003) Effect of fuel cetane number and injection pressure on a DI Diesel engine performance and emissions, Energy Conver. Manag. 44, 3, 389–397. [CrossRef] [Google Scholar]
Ren Y., Huang Z., Miao H., Jiang D., Zeng K., Liu B., Wang X. (2007) Combustion and emission characteristics of a direct-injection diesel engine fueled with diesel-diethyl adipate blends, Energy Fuels 21, 3, 1474–1482. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.