EDP Sciences logo
Submit your paper
Search
Menu
Home All issues Volume 79 (2024) Sci. Tech. Energ. Transition, 79 (2024) 59 References
Open Access
Issue
Sci. Tech. Energ. Transition
Volume 79, 2024
Article Number 59
Number of page(s) 9
DOI https://doi.org/10.2516/stet/2024063
Published online 27 August 2024
  • Xie J., Fu Q., Han M., Shi F. (2018) Method for monitoring and identifying drill bit wear and mud pockets based on drilling parameters, Drill. Prod. Technol. 41, 2, 9–12. [Google Scholar]
  • Sun L., Zhang J., Wang L., Cao J., Cui X. (2015) Optimization method for drilling parameters of PDC bit in mudstone formation, Drill. Prod. Technol. 38, 3, 26–29+10. [Google Scholar]
  • Waughman R.J., Kenner J.V., Moore R.A. (2003) Real-time specific energy monitoring enhances the understanding of when to pull worn PDC bits, SPE Drill. Completion 18, 1, 59–67. [CrossRef] [Google Scholar]
  • Yang Q. (2007) Analysis of PDC drill bits at the bottom of the well, Pet. Min. Mach. 369, 5, 34–36. [Google Scholar]
  • Zou D., Wang R. (2005) Design of lateral force balance for blade PDC drill bits, J. Pet. Univ. (Nat. Sci. Ed.) 29, 2, 42–44. [Google Scholar]
  • Chen H., Huang J., Teng H., Chen H., Huang B. (2010) Research and application of anti vortex drill bits, Drill. Prod. Technol. 33, 2, 76–78. [Google Scholar]
  • Chen X. (2017) Application of a new method for optimizing drilling efficiency based on mechanical specific energy theory in Daniudi gas field, Drill. Prod. Technol. 40, 4, 28–31+3. [Google Scholar]
  • Pessier R.C., Fear M.J. (1992) Quantifying common drilling problems with mechanical specific energy and a bit-specific coefficient of sliding friction, in: SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers. [Google Scholar]
  • Vashisth S., Nigam K.D.P. (2007) Experimental investigation of pressure drop during two-phase flow in a coiled flow inverter, Ind. Eng. Res. 46, 5043–5050. [CrossRef] [Google Scholar]
  • Fan H., Feng G., Xiao W., Ma J., Ye Z. (2012) A new method for monitoring drill wear based on mechanical specific energy theory, Pet. Drill. Technol. 40, 3, 116–120. [Google Scholar]
  • Armenta M. (2008) Identifying inefficient drilling conditions using drilling-specific energy, in: SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers. [Google Scholar]
  • Rashidi B., Hareland G., Nygaard R. (2008) Real-time drill bit wear prediction by combining rock energy and drilling strength concepts, in: Abu Dhabi International Petroleum Exhibition and Conference, Society of Petroleum Engineers. [Google Scholar]
  • Hu Y., Cheng L., Jiang B. (2021) A method for monitoring formation pressure in the Yingqiong Basin based on mechanical specific energy drilling efficiency, Drill. Prod. Technol. 44, 4, 7–10. [Google Scholar]
  • Cui M., Li J., Ji G., Chen Y. (2014) Optimization method for composite drilling parameters based on mechanical specific energy theory, Pet. Drill. Technol. 42, 1, 66–70. [Google Scholar]
  • Hu Z., Yang J., Wang L., Hou X., Zhang Z. (2022) Technology of intelligent identification and aging analysis of drilling conditions, Oil Drill. Prod. Technol. 44, 2, 241–246. [Google Scholar]
  • Liu S., Cao X. (2022) Intelligent drilling condition recognition method based on decision tree, New Ind. 12, 1, 28–30. [Google Scholar]
  • Di Q., Wu Z., Wang W., Qin G., Chen F. (2019) Maximum von Mises stress prediction method for casing based on SVM, Pet. Drill. Tech. 47, 3, 62–67. [Google Scholar]
  • Sun T., Zhao Y., Yang J., Yin Q., Wang W. (2019) Real-time intelligent drilling condition recognition method based on support vector machine, Pet. Drill. Tech. 47, 5, 28–33. [Google Scholar]
  • Teale R. (1965) The concept of specific energy in rock drilling, Int. J. Rock Mech. Min. Sci. Geomech. Abstr. Pergamon 2, 1, 57–73. [CrossRef] [Google Scholar]
  • Koederitz W.L. (2005) A real-time implementation of MSE, in: Proceedings of AADE Natl Technical Conference and Exhibition, Houston, TX. [Google Scholar]
  • Dupriest F.E., Koederitz W.L. (2005) Maximizing drill rates with real-time surveillance of mechanical specific energy, in: SPE/IADC Drilling Conference, Society of Petroleum Engineers. [Google Scholar]
  • Cherif H., Bits S. (2012) FEA modelled MSE/UCS values optimise PDC design for entire hole section, in: North Africa Technical Conference and Exhibition, Cairo, Egypt, 20–22 February. [Google Scholar]
  • Meng Y., Yang M., Li G., Li Y., Tang S. (2012) A new method for evaluating and optimizing drilling efficiency while drilling based on mechanical specific energy theory, J. China Univ. Pet. (Nat. Sci. Ed.) 36, 2, 110–114+119. [Google Scholar]
  • Zhou Z. (2020) Machine learning, Tsinghua University Press, Beijing. [Google Scholar]
  • Yin Q.S., Yang J., Tyagi M., Zhou X., Hou X., Wang N., Tong G., Cao B. (2021) Machine learning for deepwater drilling: gas-kick-alarm classification using pilot scale rig data with combined surface-riser-downhole monitoring, SPE J. 26, 4, 1773–1799. [CrossRef] [Google Scholar]
  • Breiman L. (2001) Random forests, Mach. Learn. 45, 1, 5–32. [Google Scholar]
  • Bengio Y., Simard P., Frasconi P. (1994) Learning long-term dependencies with gradient descent is difficult, IEEE Trans. Neural Networks 5, 2, 157–166. [Google Scholar]
  • Liu Y., Zhang Y., Zheng W.F. (2022) Optimization research of denoised hierarchical mapping analysis for multidimensional cluster analysis, J. Sichuan Univ. (Nat. Sci. Ed.) 59,1, 84–92. [Google Scholar]
  • Wang C., Liu G., Yang Z., Li J., Zhang T., Jiang H., Cao C. (2020) Down hole working status analysis and drilling complications detection method based on deep learning, J. Natural Gas Sci. Eng. 81, 103485. [CrossRef] [Google Scholar]
  • Hintong E., Osindero S., Teh Y.W. (2006) A fast learning algorithm for deep belief nets, Neural Comput. 18, 7, 1527–1554. [CrossRef] [PubMed] [Google Scholar]
  • Sevilla J., Heim L., Ho A., Besiroglu T., Hobbhahn M., Villalobos P. (2022) Compute trends across three eras of machine learning, Preprint https://doi.org/10.48550/arXiv.2202.05924. [Google Scholar]
  • Schmidhuber J. (2015) Deep learning in neural networks: an overview, Neural Netw. 61, 85–117. [CrossRef] [Google Scholar]
  • Lecun Y., Bengio Y., Hinton G. (2015) Deep learning, Nature 521, 7553, 436–444. [CrossRef] [PubMed] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.