Enhancing flat plate collector efficiency with microtubes and sodium sulfate decahydrate-copper oxide PCM | Science and Technology for Energy Transition (STET)

Open Access

Issue		Sci. Tech. Energ. Transition Volume 80, 2025


Article Number		53
Number of page(s)		20
DOI		https://doi.org/10.2516/stet/2025034
Published online		23 December 2025

Khan M.M.A., Ibrahim N.I., Mahbubul I.M., Ali H.M., Saidur R., Al-Sulaiman F.A. (2018) Evaluation of solar collector designs with integrated latent heat thermal energy storage: A review, Sol. Energy 166, 334–350. [Google Scholar]
Sakhaei S.A., Valipour M.S. (2021) Thermal behavior of a flat plate solar collector with simultaneous use of helically heat collecting tubes and phase change materials. Sust. Energy Technol. Assess. 46, 101279. [Google Scholar]
Mehrdad S., Mirkhani N., Sajadi B. (2018) A comprehensive study on the effect of hot water demand and PCM integration on the performance of SDHW system, Sol Energy 159, 405–414. [Google Scholar]
Pere M., Solé C., Castell A., Cabeza L.F. (2014) The use of phase change materials in domestic heat pump and air-conditioning systems for short term storage: A review, Renew. Sust. Energy Rev. 39, 1–13. [Google Scholar]
Luisa C.F., Manuel I., Cristian S., Joan R., Miquel N. (2006) Experimentation with a water tank including a PCM module, Sol. Energ. Mat. Sol. Cells 90, 9, 1273–1282. [Google Scholar]
Hirmiz R., Lightstone M.F., Cotton J.S. (2018) Performance enhancement of solar absorption cooling systems using thermal energy storage with phase change materials, Appl. Energy 223, 11–29. [Google Scholar]
Mohamed E.Z., Zhao J., Ammar H.E., Yanping D., Hammad F.A., Ling M., Kabeel A.E., Sadek S. (2019) Performance augmentation of flat plate solar water collector using using phase change materials and nanocomposite phase change materials: A review, Process Saf. Environ. Prot. 128, 135–157. [Google Scholar]
Radouane E. (2021) Improvement of the thermal performance of a solar triple concentric-tube thermal energy storage unit using cascaded phase change materials, J. Energ. Storage 42, 103047. [Google Scholar]
Seyed S.A., Valipour M.S. (2021) Thermal behavior of a flat plate solar collector with simultaneous use of helically heat collecting tubes and phase change materials, Sust. Energ. Technol. Assess. 46, 101279. [Google Scholar]
Radouane E., Qarnia H.E. (2019) Performance evaluation of a solar thermal energy storage system using nanoparticle-enhanced phase change material, Int. J. Hydrogen Energ 44, 3, 2013–2028. [Google Scholar]
Sharma H.K., Kumar S., Kumar S., Verma S.K. (2022) Performance investigation of flat plate solar collector with nanoparticle enhanced integrated thermal energy storage system, J. Energ. Storage 55, 105681. [Google Scholar]
Sinem I., Yıldız C. (2020) Improving thermal energy storage efficiency of solar collector tanks by placing phase change materials in novel finned-type cells, Ther. Sci. Eng. Prog. 19, 100618. [Google Scholar]
Fei L., Zhang Y., Liu Q., Jin Z., Zhao X., Long E. (2017) Experimental study on thermal energy storage performance of water tank with phase change materials in solar heating system, Proc Eng. 205, 3027–3034. [Google Scholar]
Wang D., Huo X., Liu Y., Chen Y., Fan B., Xu T., Wang L.L. (2022) A study on frost and high-temperature resistance performance of supercooled phase change material-based flat panel solar collector, Sol. Energ. Mat. Sol. Cells 239, 111665. [Google Scholar]
Greg W., Rubel R.I. (2021) Design improvement of a laboratory prototype for efficiency evaluation of solar thermal water heating system using phase change material (PCMs), Results Eng. 12, 100301. [Google Scholar]
Abu-Hamdeh N.H., Khoshaim A., Alzahrani M.A., Hatamleh R.I. (2022) Study of the flat plate solar collector’s efficiency for sustainable and renewable energy management in a building by a phase change material: Containing paraffin-wax/Graphene and Paraffin-wax/graphene oxide carbon-based fluids, J. Build. Eng. 57, 104804. [Google Scholar]
Gul H., Ghafoor M.A., Yousaf M., Imran M., Zaman M., Elkamel A., Haq A., Rizwan M., Wilberforce T., Abdelkareem M.A., Olabi A.G. (2022) Low temperature phase change materials for thermal energy storage: Current status and computational perspectives, Sust. Energ. Technol. Assess. 50, 101808. [Google Scholar]
Debasree G., Ghose J., Datta P., Kumari P., Paul S. (2022) Strategies for phase change material application in latent heat thermal energy storage enhancement: Status and prospect, J. Energ. Storage 53, 105179. [Google Scholar]
Maridurai T., Rajkumar S., Arunkumar M., Mohanavel V., Arul K., Madhesh D., Subbiah R. (2022) Performance study on phase change material integrated solar still coupled with solar collector, Mat. Today: Proc. 59, 1319–1323. [Google Scholar]
Arvind Kumar S., Agarwal N., Saxena A. (2021) Effect of extended geometry filled with and without phase change material on the thermal performance of solar air heater, J. Energ Storage 39, 102627. [Google Scholar]
Ali S., Farahani S.D., Alizadeh A. (2023) Numerical investigation and group method of data handling-based prediction on new flat plate solar collector integrated with nanoparticles enhanced phase change materials and tube rotation mechanism, J. Energ. Storage 67, 107542. [Google Scholar]
Ahmed S.F., Rafa N., Mehnaz T., Ahmed B., Islam N., Mofijur M., Hoang A.T., Shafiullah G.M. (2022) Integration of phase change materials in improving the performance of heating, cooling, and clean energy storage systems: An overview, J. Cleaner Prod. 364, 132639. [Google Scholar]
Wang C., Chen K., Huang J., Cai Z., Hu Z., Wang T. (2019) Thermal behavior of polyethylene glycol based phase change materials for thermal energy storage with multiwall carbon nanotubes additives, Energy 180, 873–880. [Google Scholar]
Xin L., Zhao Y., Min X., Xiao J., Wu X., Mi R., Liu Y., Huang Z., Fang M. (2022) Carbon nanotubes modified graphene hybrid Aerogel-based composite phase change materials for efficient thermal storage, Energ. Build. 273, 112384. [Google Scholar]
Muhammad Z.H., Jin X., Sharma R., Pei J., Hu J.W. (2022) Enhancing the compressive strength of thermal energy storage concrete containing a low-temperature phase change material using silica fume and multiwalled carbon nanotubes, Constr. Build. Mat. 314, 125659. [Google Scholar]
NematpourKeshteli A., Iasiello M., Langella G., Bianco N. (2023) Increasing melting and solidification performances of a phase change material-based flat plate solar collector equipped with metal foams, nanoparticles, and wavy wall-Y-shaped surface, Energy Convers. Manag. 291, 117268. [Google Scholar]
NematpourKeshteli A., Iasiello M., Langella G., Bianco N. (2023) Thermal enhancement techniques for a lobed-double pipe PCM thermal storage system, Appl. Thermal Eng. 233, 121139. [Google Scholar]
Abdulateef A.M., Mat S., Abdulateef J., Sopian K., Al-Abidi A.A. (2018) Thermal performance enhancement of triplex tube latent thermal storage using fins-nano-phase change material technique, Heat Transf. Eng. 39, 12, 1067–1080. [Google Scholar]
Shehram M., Javid T., Khalid Z. (2021) Hybrid multijunction PV and CST based solar cooling system using flat plate collector and graphene based nanofluid, in: 2021 6th International Electrical and Electronics Engineering Conference (IEEC, April 2021). [Google Scholar]
Jamil M.M., Sidik N.A.C., Umar U.S., Hamisu M.T., Sa’ad A. (2019) Carbon nanotube for solar energy applications: A review, J. Adv. Res. Fluid Mech. Therm. Sci. 56, 2, 233–247. [Google Scholar]
Christina V.P., Kartsonakis I.A., Charitidis C.A. (2021) Towards phase change materials for thermal energy storage: Classification, improvements and applications in the building sector, Appl. Sci. 11, 4 1490. [CrossRef] [Google Scholar]
Nazir H., Batool M., Bolivar Osorio F.J., Isaza-Ruiz M., Xu X., Vignarooban K., Phelan P., Kannan A.M. (2019) Recent developments in phase change materials for energy storage applications: A review, Int. J. Heat Mass Transf. 129, 491–523. [Google Scholar]
Muhammad F.J., Rehman Z., Čekon M., Čurpek J., Farooq R., Cui H., Khan I. (2021) Inorganic phase change materials in thermal energy storage: A review on perspectives and technological advances in building applications, Energ. Build. 252, 111443. [Google Scholar]
Mohamed S.A., Al-Sulaiman F.A., Ibrahim N.I., Zahir M.H., Al-Ahmed A., Saidur R., Yılbaş B.S., Sahin A.Z. (2017) A review on current status and challenges of inorganic phase change materials for thermal energy storage systems, Renew. Sust. Energ. Rev. 70, 1072–1089. [Google Scholar]
Teamah H.M., Teamah M. (2022) Integration of PCM in flat plate solar water collector: A state of the art, opportunities, and challenges, J. Energ. Storage 54, 105357. [Google Scholar]
Gholamabbas S., Mehrali M., Shahi M., Brem G., Mahmoudi A. (2022 Progress of experimental studies on compact integrated solar collector-storage retrofits adopting phase change materials, Sol. Energ. 237, 62–95. [Google Scholar]
Faraj K., Khaled M., Faraj J., Hachem F., Castelain C. (2020) Phase change materials thermal energy storage systems for cooling applications in buildings: A review. Renew. Sust. Energ. Rev. 119, 109579. [Google Scholar]
Amaral C., Vicente R., Marques P.A.A.P., Barros-Timmons A. (2017) Phase change materials and carbon nanostructures for thermal energy storage: A literature review. Renew. Sust. Energ. Rev. 79, 1212–1228. [Google Scholar]
Amidu M.A., Addad Y., Riahi M.K., Abu-Nada E. (2021) Numerical investigation of nanoparticles slip mechanisms impact on the natural convection heat transfer characteristics of nanofluids in an enclosure, Sci. Rep. 11, 1, 15678. [Google Scholar]
Amidu M.A., Ali M., Alkaabi A.K., Addad Y. (2023) A critical assessment of nanoparticles enhanced phase change materials (NePCMs) for latent heat energy storage applications, Sci. Rep. 13, 1 7829. [Google Scholar]
Mashhour A.A., Mohammed A., Mohammad R.S. (2022) Effects of various types of nanomaterials on PCM melting process in a thermal energy storage system for solar cooling application using CFD and MCMC methods, Int. J. Heat Mass Transf. 195, 123204. [Google Scholar]
Badiei Z., Eslami M., Jafarpur K. (2020) Performance improvements in solar flat plate collectors by integrating with phase change materials and fins: A CFD modeling, Energy 192, 116719. [Google Scholar]
Mahfuja A.K., Yan L., Khalesi J., Sarunac N., Romero C. (2024) Energy and exergy analysis of a laboratory-scale latent heat thermal energy storage (LTES) using salt-hydrate in a staggered tube arrangement, J. Energ. Storage 87, 111320. [Google Scholar]
Badiei Z., Eslami M., Jafarpur K. (2020) Performance improvements in solar flat plate collectors by integrating with phase change materials and fins: A CFD modeling, Energy 192, 116719. [Google Scholar]
Zhang S., Yan Y. (2023) Energy, exergy and economic analysis of ceramic foam-enhanced molten salt as phase change material for medium-and high-temperature thermal energy storage, Energy 262, 125462. [Google Scholar]
Poongavanam G.K., Vigneswaran V.S., Murugan P., Cheralathan M., Velraj R., Kim S.C., Ramkumar V. (2024) Exploring the thermal performance of a solar air heater with a V-corrugated and shot-blasted absorber plate comprising nano-enhanced phase change materials, J. Energ Storage 77, 109955. [Google Scholar]
Bharathiraja R., Ramkumar T., Selvakumar M., Sasikumar K. (2014) Experimental and numerical analysis of hybrid nano-enhanced phase change material (PCM) based flat plate solar collector, J. Energ. Storage 96, 112649. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.